Burleson Epoxy Flooring & Concrete Polishing is a concrete flooring contractor serving Kennedale, TX, specializing in polyaspartic floor coatings, garage floor coatings, and polished concrete. We have served the southeast Tarrant County area since 2015, and every quote starts with a free on-site look at your slab.
Kennedale garages take a beating from triple-digit summers and the clay soil that never stops shifting underneath. A polyaspartic floor coating cures faster than standard epoxy, handles the extreme surface temperatures common here, and gives you a sealed, durable floor that holds up through North Texas weather cycles.
Most Kennedale homes have an attached two-car garage with a concrete slab that has absorbed years of oil drips and tire scuffs. A durable garage floor coating stops that cycle - spills wipe clean, the surface stops dusting, and the space finally looks like it belongs with the rest of your home.
Kennedale homeowners renovating open living areas increasingly choose polished concrete for its clean look and low upkeep. The slab already under your existing tile or carpet can be ground and polished to a smooth, modern finish that does not warp in the heat or need replacement every few years.
Kennedale slabs often show hairline cracks and surface wear from years of clay soil movement. Proper diamond grinding and profiling removes old sealers, opens the surface for a strong bond, and fills cracks so any coating applied on top actually holds through future seasonal shifts.
Driveways and patios in Kennedale take a pounding from the soil shifting underneath them. Concrete resurfacing lays a fresh layer over the existing slab - restoring the surface and sealing damage without the cost and disruption of tearing everything out and starting over.
Unsealed concrete on Kennedale driveways and patios absorbs moisture during wet springs and bakes dry all summer - a cycle that accelerates surface breakdown. Sealing locks out that moisture, extends the life of the slab, and makes the surface easier to clean year-round.
Kennedale sits on the same Tarrant County clay that causes concrete problems all over the southeast Fort Worth area. That clay swells after rain and shrinks in the dry heat, and it never really settles. Garage slabs, driveways, patios, and interior floors in Kennedale have all been responding to that movement since the day they were poured. Homes near the original town center - many of them built in the 1960s and 1970s - have had decades more exposure to that cycle than the newer subdivisions on the south and east sides of the city. A contractor who works here regularly knows to assess every slab before quoting, because coating over an unstable crack just means the crack comes back through the finish within a year.
Climate adds another layer. Kennedale summers regularly hit 100 degrees, and that heat creates a narrow window for applying coatings correctly. Concrete surfaces baking in direct sun all morning can exceed the safe application range for most products, causing fast curing that traps bubbles and weakens the bond. Experienced contractors in this market schedule work for early morning in summer, use heat-tolerant products, and will delay a job rather than push through in bad conditions. Then come spring, storms roll through Tarrant County and raise the moisture content in slabs - a slab ready to coat in November may need moisture testing again in April before work starts. These are the details that separate a coating job that lasts from one that needs redoing in three years.
Our crew works throughout Kennedale regularly, and we understand the local conditions that affect concrete flooring work here. When projects require permits, we coordinate with the City of Kennedale directly - most coating and polishing work on existing slabs does not require a permit, but structural repairs and new pours do, and we handle that process without putting it on the homeowner.
Kennedale has a mix of housing stock that shapes what we expect on each job. The neighborhoods close to downtown and U.S. Highway 287 include a lot of 1960s and 1970s brick ranch homes where slabs have had decades to respond to the soil underneath them. The newer subdivisions built in the 2000s and 2010s on the south and east sides of the city - closer to Kennedale Community Park and Wildcat Stadium - tend to have younger slabs in better structural shape, though they sometimes carry leftover curing compounds from original construction that have to be fully removed before a coating will bond. We work across both sides of that divide and adjust our approach accordingly.
We also serve communities right next to Kennedale. If you are across the city line in Arlington to the north, or if you are out in Forest Hill to the west, we cover those areas as part of our regular southeast Tarrant County work.
When you call, we ask a few quick questions about the space - size, current condition, and what you are hoping to accomplish. We schedule an on-site visit rather than quoting over the phone, because the condition of your slab matters too much to guess. We reply within 1 business day.
We inspect your concrete in person - checking for cracks, old sealers, moisture coming up through the slab, and any areas that need repair before coating begins. You get a written estimate with no surprises, and we address any cost questions during this visit so you know exactly what the job involves.
On the day of installation, we diamond-grind the slab, fill cracks, and apply the coating in the correct sequence. You do not need to be present during the work, but the space needs to be cleared beforehand. Polyaspartic coatings on a standard garage typically reach walk-on cure within a few hours.
Once the coating has cured, we walk the floor with you to confirm everything meets expectations. We cover care and maintenance basics - what cleaners to use, when you can park vehicles, and what to watch for over the first few weeks. You leave with a floor you can use and a clear picture of how to keep it.
We serve Kennedale and the surrounding Tarrant County area. Free on-site estimates. No pressure, no guesswork.
(682) 318-0327Kennedale is a small city in Tarrant County tucked between Fort Worth and Arlington, right along the U.S. Highway 287 corridor. Its population has grown from around 5,000 in 2000 to over 8,000 today, and that growth brought two distinct neighborhoods: the established older streets near the original town center, where brick ranch homes from the 1960s and 1970s sit on mid-sized lots, and the newer subdivisions built on the south and east edges of the city in the 2000s and 2010s. Most residents are homeowners, and Kennedale's own school district - the Kennedale Independent School District - draws families who plan to stay long-term. That combination of ownership rates and school district loyalty means people here invest in their homes rather than just maintaining them.
The newer subdivisions on the south side near Kennedale Community Park tend to have larger lots - often a quarter acre or more - with more concrete flatwork to maintain: longer driveways, wider patios, and detached workshop slabs that all feel the effects of the local clay soil over time. We work across the whole city, from the brick ranch neighborhoods near downtown to the newer builds out by Wildcat Stadium. If you are in a neighboring community to the west - such as Everman - or over in Forest Hill , we cover those areas as part of the same service territory.
Transform any concrete surface into a durable, attractive, easy-to-clean finished floor.
Learn MoreHeavy-duty floor coatings built for high-traffic commercial and industrial environments.
Learn MoreGive your garage a showroom-quality floor that resists stains and daily abuse.
Learn MoreFast-curing, UV-stable coatings that deliver lasting protection in a single day.
Learn MoreStunning, one-of-a-kind metallic finishes that turn any floor into a centerpiece.
Learn MoreChemical- and thermal-resistant flooring ideal for kitchens, breweries, and food facilities.
Learn MoreSmooth, reflective concrete floors that are low-maintenance and long-lasting.
Learn MoreRich color and unique patterns applied directly to existing concrete surfaces.
Learn MoreClassic aggregate flooring delivering timeless beauty and exceptional long-term durability.
Learn MoreMoisture-resistant basement floors that look great and stand up to humidity.
Learn MoreProper surface prep that ensures every coating bonds tightly and lasts longer.
Learn MoreProtective sealers that guard concrete from moisture, stains, and daily wear.
Learn MoreRefresh worn or damaged concrete without the cost of full replacement.
Learn MoreLevel uneven slabs quickly and precisely before any coating or finish is applied.
Learn MoreSlip-resistant, heat-reflective pool deck surfaces that are safe and attractive.
Learn MoreClean removal of old coatings, adhesives, and finishes to prepare for new work.
Learn MoreCall us today for a free on-site estimate. We assess your slab in person and give you a clear, honest picture of what the job involves.
